Skip to main content
Search
Contact
English
back
Products
Overview
back
Service
Overview
back
About KESSEL
Overview
back
Backwater protection
back
Hybrid lifting stations
back
Pump technology
back
Drain technology
back
Separators
back
Engineering chambers
back
Individual solutions
back
Catalogues & brochures
back
Installation and operating instructions
back
Spare parts
back
BIM data and CAD drawings
back
SmartSelect
back
References
back
Company profile
back
Integrated management system
back
Sustainability
QUICKLINKS

Pumping station Aquapump XL

Mono, STZ 1400-S1

PDF product data sheet

The pumping station for faecal-free wastewater is equipped with a submersible pump and a backflow preventer. The collection tank made of permanently resistant polymer (PE) has an open pump tank with universal connection options. Quick-release closures enable the integrated components to be removed easily. The KESSEL modular system provides different engineering chamber options as accessories for the further layout.

  • Maximum safety
  • Flexible installation
  • Also handles large quantities of faecal-free wastewater
Item no. 8743032
GTIN 4026092078976
Price group 60

Pumping station Aquapump XL Mono, STZ 1400-S1
The pumping station for faecal-free wastewater is equipped with a submersible pump and a backflow preventer. The collection tank made of permanently resistant polymer (PE) has an open pump tank with universal connection options. Quick-release closures enable the integrated components to be removed easily. The KESSEL modular system provides different engineering chamber options as accessories for the further layout. Type of wastewater: wastewater without sewage Version: Type of system: Single station Installation: Wet installation Shut-off valve: Shut-off valve made of polymer Pump control: Float switch Backflow preventer: integrated Access steps: yes Passage seal for ventilation pipe (DN): 100 mm Passage seal for conduit pipe (DN): 100 mm Delivery state: Pre-mounted for final assembly on site (pumps and sensor system must be fitted on site and control unit must be connected) General characteristics: Colour: black Standard: EN 12050-2 Dimensions: Length: 1,300 mm Width: 1,300 mm Height: 1,416 mm Tank: Number of inlets: 1 ST Inlet nominal size (DN): 150 Inlet nominal size (OD): 160 mm Pumping volume: 210 l Pressure pipe connection: horizontal Pressure pipe connection (DN): 80 mm Pressure pipe connection (OD): 90 mm Groundwater resistant from lower edge of base section: 3,000 mm Clear width of tank (LW): 1,000 mm Pumping device: Pump: GTF 1400 Number of pumps: 1 Max. pumping capacity: 31 m3/h Max. pumping height: 10.5 m Operating voltage: 230 V Mains frequency: 50 Hz Operating mode: S1 Power P1: 1.5 kW Power P2: 1.1 kW Speed: 2,900 U/min Type of fuse required (electrical protection): C 16 A Max. temperature (permanent) of conveyed material: 40 °C Connection type: Schuko (earthed contact) 2-pin Weight: 22 kg Impeller type: Multi-vane impeller Length of mains cable for pump: 10 m Rated current: 6.5 A Protection class (pump): IP 68 (20m) Protection class: I Type of pump connection cable: H07RN-F 3G 1.5 mm2 Temperature monitoring: integrated Cos phi - power factor: 0.99 Insulation class: H Control: Motor protection switch: yes Level measurement instrument: Float switch

Installation Video

  Title Item no.  
  Title Item no.  
  Title Item no.  
  Title Item no.  
  • Country of origin (ATTR-322): DE
  • Area of application (ATTR-264): drainage
  • Pump type (ATTR-265): submersible pump
  • Pump shaft position (ATTR-266): vertical
  • Pump design (ATTR-267): Dry rotor pump
  • Pump hydraulics (ATTR-268): single stage
  • Pump suction characteristic (ATTR-269): non-self-priming
  • Pump drive (ATTR-270): E-motor for alternating current
  • E-motor, type of startup (ATTR-271): direct
  • Pump casing material (ATTR-272): Grey iron
  • Upper tolerance of the operating voltage (+) (ATTR-273): 5  PROZ
  • Lower tolerance of the operating voltage (-) (ATTR-274): 5  PROZ
  • Pump electrical connection (ATTR-277): 1/N/PE 230V
  • Motor pump shaft (ATTR-279): continuous
  • Shaft seal (ATTR-280): MS
  • Number of operating pumps (ATTR-281): 1
  • Minimum pumped media temperature (ATTR-282): 0  CEL
  • Maximum operating pressure (Pmax) (ATTR-283): 1,050  HPA
  • Minimum speed for speed adjustment (ATTR-284): no speed adjustment
  • Pump (ATTR-4): GTF 1400
  • Number of pumps (ATTR-181): 1
  • Impeller type (ATTR-8): Multi-vane impeller
  • Type of pump connection cable (ATTR-N2): H07RN-F 3G 1.5 mm2
  • Type of fuse required (electrical protection) (ATTR-N3): C 16 A
  • Max. permissible switching frequency (ATTR-162): 15  1PH
  • Operating mode (ATTR-10): S1
  • Power P1 (ATTR-F4): 1.5  KWT
  • Power P2 (ATTR-F5): 1.1  KWT
  • Speed (ATTR-F2): 2,900  UMIN
  • Operating voltage (ATTR-131): 230  VLT
  • Mains frequency (ATTR-N4): 50  HTZ
  • Rated current (ATTR-N5): 6.5  AMP
  • Max. pumping capacity (ATTR-F7): 31  MQH
  • Max. pumping height (ATTR-F8): 10.5  MTR
  • Max. temperature (permanent) of conveyed material (ATTR-132): 40  CEL
  • Protection class (ATTR-133): I
  • Connection type (ATTR-N1): Schuko (earthed contact) 2-pin
  • Protection class (pump) (ATTR-125): IP 68 (20m)
  • Length of mains cable for pump (ATTR-11): 10  MTR
  • Temperature monitoring (ATTR-135): integrated
  • Weight (ATTR-191): 22  KGM
  • Cos phi - power factor (ATTR-192): 1.0
  • Insulation class (ATTR-193): H
  • Expected service life (hours of operation) (ATTR-194): 5,000  HUR
  • Expected service life (number of switching cycles) (ATTR-195): 150,000
  • Net weight (ATTR-A3A): 147  KGM
  • Gross weight (ATTR-A3B): 168  KGM
  • Shut-off valve (ATTR-A1): Shut-off valve made of polymer
  • Pressure pipe connection (ATTR-B7): horizontal
  • Type of system (ATTR-2): Single station
  • Installation (ATTR-164): Wet installation
  • Backflow preventer (ATTR-165): integrated
  • Pump control (ATTR-134): Float switch
  • Access steps (ATTR-182): yes
  • Passage seal for ventilation pipe (DN) (ATTR-183): 100  MMT
  • Passage seal for conduit pipe (DN) (ATTR-184): 100  MMT
  • Length (ATTR-A6A): 1,300  MMT
  • Width (ATTR-A6B): 1,300  MMT
  • Height (ATTR-A6C): 1,416  MMT
  • Volume (ATTR-320): 4.0  MTQ
  • Packaging dimension: length (ATTR-325): 2,000  MMT
  • Packaging dimension: width (ATTR-326): 1,300  MMT
  • Packaging dimension: height (ATTR-327): 1,550  MMT
  • Dimensions (ATTR-323): 1300X1300X1550/700X800X730MM
  • Number of packages (ATTR-321): 0
  • Level measurement instrument (ATTR-7B): Float switch
  • Motor protection switch (ATTR-172): yes
  • Clear width of tank (LW) (ATTR-B14): 1,000  MMT
  • Number of inlets (ATTR-B1B): 1  PCE
  • Inlet nominal size (DN) (ATTR-B1CA): 150  MMT
  • Inlet nominal size (OD) (ATTR-B1CB): 160  MMT
  • Pressure pipe connection (DN) (ATTR-B17): 80  MMT
  • Pressure pipe connection (OD) (ATTR-B18): 90  MMT
  • Pumping volume (ATTR-B10): 210  LTR
  • Groundwater resistant from lower edge of base section (ATTR-B12): 3,000  MMT
  • Wastewater quantity (ATTR-310): High
  • Type of wastewater (ATTR-6): wastewater without sewage
  • Colour (ATTR-102): black
  • Standard (ATTR-9): EN 12050-2
  • CE marking (ATTR-A5B): yes
  • Delivery state (ATTR-189): Pre-mounted for final assembly on site (pumps and sensor system must be fitted on site and control unit must be connected)
  • External monitoring (ATTR-A8): LGA
  • Brand (M-ATTR-001): KESSEL
  • Product group (M-ATTR-002): Lifting stations
  • Product type (M-ATTR-003): Pumping station
  • Product family (M-ATTR-004): Aqualift
  • Product name (M-ATTR-005): Aqualift S XL
  • Start-up current (ATTR-285): 52.2  AMP