Pumping station Aquapump XXL Pumping station Aquapump XXL 8743040 - KESSEL

Pumping station Aquapump XXL

Duo, STZ 5200-S1

Item no.	8743040
GTIN	4026092078082
Price group	60

Pumping station Aquapump XXL Duo, STZ 5200-S1
Type of wastewater: wastewater with sewage Installation situation: underground installation Version: Type of system: Twin pump station Installation: Wet installation Shut-off valve: Shut-off valve made of cast iron Pump control: Control unit Backflow preventer: integrated Access steps: yes Note on installation depth: in combination with a chamber module Passage seal for ventilation pipe (DN): 100 mm Passage seal for conduit pipe (DN): 100 mm Delivery state: Pre-mounted for final assembly on site (pumps and sensor system must be fitted on site and control unit must be connected) General characteristics: Colour: black Standard: EN 12050-1 Dimensions: Length: 1,880 mm Width: 1,880 mm Height: 2,440 mm Tank: Number of inlets: 1 ST Inlet nominal size (DN): 150 Inlet nominal size (OD): 160 mm Distance pipe bottom inlet to tank bottom: 1,320 mm Distance from centre of outlet pipe to tank bottom: 1,735 mm Distance from centre of inlet pipe to tank bottom: 1,400 mm Pumping volume: 800 l Pressure pipe connection: horizontal Pressure pipe connection (DN): 80 mm Pressure pipe connection (OD): 90 mm Groundwater resistant from lower edge of base section: 3,000 mm Clear width of tank (LW): 1,600 mm Clear width of entry (LW): 1,000 mm Chamber system: Twin walled re-enforced pipe chamber Pumping device: Pump: STZ 5200 Number of pumps: 2 Max. pumping capacity: 21.3 m3/h Max. pumping height: 52 m Operating mode: S1 Power P1: 5.2 kW Power P2: 4.4 kW Speed: 2,840 U/min Max. temperature (permanent) of conveyed material: 40 °C Connection type: Direct connection Weight: 56 kg Impeller type: Macerator Length of mains cable for pump: 10 m Rated current: 8.7 A Protection class (pump): IP 68 (20m) Protection class: I Type of pump connection cable: H07RN8-F PLU 10G 1.5 mm2 Temperature monitoring: integrated Cos phi - power factor: 0.89 Insulation class: H Control: Control unit: Comfort Plus Operating voltage: 400 V Mains frequency: 50 Hz Self-diagnosis system (SDS): yes Battery buffering: yes Multi-line display: yes Log book function: yes USB interface: yes GSM interface: yes Potential-free contact: yes Type of fuse required (electrical protection): 3 x C 32 A Motor protection switch: yes Protection class control unit: IP 54 Length of mains cable for control unit: 0 m Type of level measurement: hydrostatic Level measurement instrument: Level sensor Alarm sensor: Level sensor

Installation Video

	Title	Item no.

	Title	Item no.

	Title	Item no.

	Title	Item no.

Catalog Page	KEN42 147 (PDF)
Manuals	Control Unit Comfort PLUS Aqualift F Comfort 400 V Control unit Technical chamber LW1000 Aqualift S XL / Aqualift F XL pumping station for wet installation (with rod guide) Modbus Documentation Comfort Plus. 016-209CoPl_DE_Modbus_Dokumentation_Comfort Plus.pdf Technical chamber LW1000 RU Technical chamber LW1000 SE KESSEL Reinforcment plan for load bearing plate 1400 KESSEL pumping station Aqualift S XL - F XL (wet installation) KESSEL control unit Comfort PLUS Technical chamber LW1000 LV Pumps STZ / STF / STK 50 Hz series
CAD Data	8743040.DWG 8743040_0.dwg 8743040_01052018.DWG
Declaration of Performance	009-043_DOP_CE_Pumpe_STZ-STF-STK_Ex.pdf 009-049_DOP_CE_Aqualift_F_XL_400V.pdf Pumping station Aqualift S XL 230 V
BIM Data	Kessel_8743040_Revit2014.rfa Kessel_8743040_Revit2017.rfa

Installation situation (ATTR-1): underground installation
TÜV test mark (ATTR-376): ID 1111241940
Country of origin (ATTR-322): DE
ATEX (ATTR-136): Ja
Start-up current (ATTR-285): 522 AMP
Pump (ATTR-4): STZ 5200
Number of pumps (ATTR-181): 2
Impeller type (ATTR-8): Macerator
Type of pump connection cable (ATTR-N2): H07RN8-F PLU 10G 1.5 mm2
Max. permissible switching frequency (ATTR-162): 15 1PH
Operating mode (ATTR-10): S1
Power P1 (ATTR-F4): 5.2 KWT
Power P2 (ATTR-F5): 4.4 KWT
Speed (ATTR-F2): 2,840 UMIN
Rated current (ATTR-N5): 8.7 AMP
Max. pumping capacity (ATTR-F7): 21.3 MQH
Max. pumping height (ATTR-F8): 52 MTR
Max. temperature (permanent) of conveyed material (ATTR-132): 40 CEL
Protection class (ATTR-133): I
Connection type (ATTR-N1): Direct connection
Protection class (pump) (ATTR-125): IP 68 (20m)
Length of mains cable for pump (ATTR-11): 10 MTR
Temperature monitoring (ATTR-135): integrated
Weight (ATTR-191): 56 KGM
Cos phi - power factor (ATTR-192): 0.9
Insulation class (ATTR-193): H
Expected service life (hours of operation) (ATTR-194): 5,000 HUR
Expected service life (number of switching cycles) (ATTR-195): 150,000
Net weight (ATTR-A3A): 674.9 KGM
Gross weight (ATTR-A3B): 742.9 KGM
Shut-off valve (ATTR-A1): Shut-off valve made of cast iron
Pressure pipe connection (ATTR-B7): horizontal
Chamber system (ATTR-B8): Twin walled re-enforced pipe chamber
Type of system (ATTR-2): Twin pump station
Installation (ATTR-164): Wet installation
Backflow preventer (ATTR-165): integrated
Pump control (ATTR-134): Control unit
Access steps (ATTR-182): yes
Note on installation depth (ATTR-188): in combination with a chamber module
Passage seal for ventilation pipe (DN) (ATTR-183): 100 MMT
Passage seal for conduit pipe (DN) (ATTR-184): 100 MMT
Length (ATTR-A6A): 1,880 MMT
Width (ATTR-A6B): 1,880 MMT
Height (ATTR-A6C): 2,440 MMT
Volume (ATTR-320): 10.1 MTQ
Packaging dimension: length (ATTR-325): 3,200 MMT
Packaging dimension: width (ATTR-326): 1,800 MMT
Packaging dimension: height (ATTR-327): 1,760 MMT
Dimensions (ATTR-323): 3200X1800X1760MM
Number of packages (ATTR-321): 1
Control unit (ATTR-S2): Comfort Plus
Self-diagnosis system (SDS) (ATTR-S5): yes
Battery buffering (ATTR-S6): yes
Multi-line display (ATTR-S7): yes
Log book function (ATTR-S8): yes
USB interface (ATTR-S9): yes
GSM interface (ATTR-S10): yes
Potential-free contact (ATTR-S11): yes
Length of mains cable for control unit (ATTR-S12): 0 MTR
Operating voltage (ATTR-S13): 400 VLT
Mains frequency (ATTR-S14): 50 HTZ
Protection class control unit (ATTR-S4): IP 54
Alarm sensor (ATTR-S1): Level sensor
Type of level measurement (ATTR-7A): hydrostatic
Level measurement instrument (ATTR-7B): Level sensor
Type of fuse required (electrical protection) (ATTR-S17): 3 x C 32 A
Motor protection switch (ATTR-172): yes
Clear width of entry (LW) (ATTR-B13): 1,000 MMT
Clear width of tank (LW) (ATTR-B14): 1,600 MMT
Number of inlets (ATTR-B1B): 1 PCE
Inlet nominal size (DN) (ATTR-B1CA): 150
Inlet nominal size (OD) (ATTR-B1CB): 160 MMT
Distance from centre of inlet pipe to tank bottom (ATTR-B6): 1,400 MMT
Distance pipe bottom inlet to tank bottom (ATTR-B1D): 1,320 MMT
Distance from centre of outlet pipe to tank bottom (ATTR-B15E): 1,735 MMT
Pressure pipe connection (DN) (ATTR-B17): 80 MMT
Pressure pipe connection (OD) (ATTR-B18): 90 MMT
Pumping volume (ATTR-B10): 800 LTR
Groundwater resistant from lower edge of base section (ATTR-B12): 3,000 MMT
Distance from inlet pipe invert to top of tank (ATTR-318): 1,090 MMT
Colour (ATTR-102): black
Standard (ATTR-9): EN 12050-1
CE marking (ATTR-A5B): yes
Delivery state (ATTR-189): Pre-mounted for final assembly on site (pumps and sensor system must be fitted on site and control unit must be connected)
External monitoring (ATTR-A8): LGA
Declaration of Performance (DOP) (ATTR-292): 009-047
Wastewater quantity (ATTR-310): High
Type of wastewater (ATTR-6): wastewater with sewage
Brand (M-ATTR-001): KESSEL
Product group (M-ATTR-002): Lifting stations
Product type (M-ATTR-003): Pumping station
Product family (M-ATTR-004): Aqualift
Product name (M-ATTR-005): Aqualift F XL